Set of 3D printed parts to create a Falcon 9 Dragon model based upon a BT 60 Body Tube. Features nose cone, four grid fins, four retracted landing gear, display end cap with 9 nozzles and end cap for flight with only the outer nozzles. 3D printed parts only. Requires additional structural components. See additional information regarding the complete model at: https://www.apogeerockets.com/Falcon-9-Crew-Dragon-Plan
These parts are printed using resin material and a SLA printer. They have been processed post printing to remove residual resin and support material. Final finishing is straightforward. Minimal sanding with superfine sandpaper is usually all that is required. If there is residual uncured resin present it should be removed prior to finishing. Wiping the part down with a microfiber cloth soaked with isopropyl alcohol is recommended. Let the part air dry completely before proceeding. Applying a primer is needed before final painting. Tamiya brand primer is strongly recommended. Recommended adhesives are standard epoxies or cyanoacrylate. Epoxies will give the most durable adhesion. Other adhesives will not work and may destroy the print.